Written by the myFloridaATM.com install team — Winter Park-based, ATM-only techs with 10 years and 75+ installs across Central Florida. Last updated October 6, 2026.
How do you protect an ATM from theft and skimming?
Short answer: Protect an ATM by bolting it to the floor, placing it in a visible, well-lit spot near staff, adding a steel cage or bollards in higher-risk locations, and using EMV chip readers, encrypted PIN pads and anti-skimming hardware. We size each upgrade to the location — a busy 24-hour gas station needs more protection than a staffed restaurant.
Local Risk Factors We Plan Around
Security isn’t one-size-fits-all. Here’s how it plays out across our service area:
- 24-hour stations along I-4 and US-192 see late-night traffic from tourists and travelers — we usually recommend a cage and strong camera coverage.
- Glass storefronts in strip centers on SR-436, OBT and Colonial Drive are where bollards earn their keep against ram-raids.
- Tourist corridors like International Drive attract skimming because so many cards pass through — anti-skimming kits pay off there.
- Staffed restaurants and salons on Park Avenue or in Mills 50 usually only need anchoring and good placement.
Do I need bollards for an ATM inside my store?
Only if the ATM sits right behind glass near parking. If a car could reach it, bollards are worth it.
ATM Security Upgrades We Install
| Upgrade | What it stops | Best for |
|---|---|---|
| Floor anchoring (included in every install) | Grab-and-go theft | Every ATM |
| Steel security cage | Pry attacks, forced removal | 24-hour stores, gas stations, high-crime areas |
| Bollards | Vehicle ram-raids | ATMs near glass storefronts or entrances |
| Anti-skimming card reader kits | Card skimmer overlays | High-traffic and tourist locations |
| Lighting and camera positioning | Tampering, robbery of users | Outdoor or dim locations |
| Surge protection | Lightning and power-spike damage | All Florida locations |
Signs Your ATM Needs a Security Upgrade
- It sits near the entrance of a 24-hour store
- It is visible from the street through glass
- There has been a break-in or attempted theft nearby
- It is in a dim corner without camera coverage
- It is not anchored, or the anchors are loose
- Staff have found a skimmer or loose card-reader parts
How Much Do ATM Security Upgrades Cost?
Anchoring is included in our free installation. Cages, bollards, lighting and anti-skimming kits are quoted per site after a free site check, because the right protection depends on your layout, hours and risk level. We never upsell hardware a location does not need.
Why Businesses Choose Us for ATM Security
- ATM-only focus — no POS, phones or cameras.
- Free ATM installation — no upfront installation cost; we provide, install and maintain the ATM.
- Genmega & Hyosung specialists with EMV readers and encrypted PIN pads.
- Local Central Florida techs across Orange, Seminole, Osceola, Volusia, Marion and Polk counties.
- 10 years, 75+ ATMs installed.
ATM Security FAQs
Is ATM anchoring included in installation?
Yes. Every ATM we install is bolted to the floor with anchor hardware as part of the free installation.
Do I need a cage for my ATM?
Cages are recommended for 24-hour locations, gas stations, stores with past break-ins and ATMs visible from the street. Staffed indoor locations usually only need anchoring.
How do I check my ATM for a skimmer?
Wiggle the card reader and keypad, look for parts that are loose, misaligned or a different color, and check for tiny holes or cameras above the keypad. Report anything unusual and take the ATM out of service until it is checked.
Does insurance cover a stolen ATM?
It depends on your policy. Many business policies need a specific rider for cash and equipment in an ATM. Check with your insurance agent before installation.
Get your free ATM: call (786) 554-3977 or check if your business qualifies. For qualifying businesses. No upfront cost — we install, maintain and service it.
Need an exterior machine? See through-the-wall and outdoor ATM installation.